Product Showcase
-
Series 9000 H Heated Hydrocarbon Analyzer
11/11/2014
The Baseline® Series 9000 H is a high-temperature member of the extraordinary Series 9000 family of gas analyzers. The Series 9000 is the candidate of choice whenever accurate, reliable hydrocarbon analysis is required.
-
Series 9000 Total Hydrocarbon Analyzer
11/11/2014
The Series 9000 is the candidate of choice whenever accurate, reliable total hydrocarbon analysis is required. Series 9000 analyzer provides unparalleled flexibility and offers continuous, fully automated gas analysis over a broad range of concentrations
-
GreenLight® 910- Live Aerobic Bacteria Load Calculator
1/15/2013
The GreenLight® 910 can calculate live aerobic bacteria loads in as little as 45 minutes making it possible to perform real time operational changes to processes and automatically record results.
-
GreenLight® 930- Live Aerobic Bacteria Load Calculator (High-Throughput)
1/15/2013
The GreenLight® 930 is capable of calculating live aerobic bacteria loads of 24 different samples in as little as 45 minutes.
-
Cable Splicing And Terminating – Medium Voltage
1/4/2013
Proper installation of cable splices and terminations drastically improves the lifetime of cables and prevents damage to downstream equipment, and more importantly, nearby personnel. Inadequate installation and testing of cable joints and terminations is the number one cause of failure (IEEE Std 493-2007 Table 10-33). Properly trained personnel can alleviate issues and improve safety while dealing with solid dielectric power cables.
-
Circuit Breaker Maintenance – Low Voltage
1/4/2013
Low-voltage power circuit breakers are one of the most poorly maintained protection devices in many power systems. Their exposure to moisture and contaminants makes this type of breaker more susceptible to failure without proper maintenance. Failure can lead to nuisance trips as well as more serious and life threatening situations like arc flash hazards.
-
Circuit Breaker Maintenance – Medium Voltage (Air And Vacuum)
1/4/2013
Unlike a low-voltage breaker, medium-voltage breakers rated at 1 kV or higher rely on external controls to operate effectively. That means technicians have more components to test and maintain. Failure of a breaker can cause damage to other equipment and is extremely hazardous to nearby personnel. Properly trained technicians can alleviate these dangers and improve system performance.
-
NFPA 70E 2012 Electrical Safety
1/4/2013
The NFPA 70E is an OSHA recommended industry standard for electrical safety in the workplace. This standard provides practical methods for protecting personnel from the hazards of electricity at your facility. The ability to interpret this standard and correctly apply it is essential to potentially lowering electrical accidents, improving power system reliability, and realizing OSHA compliance.
-
Electrical Safety For Utilities
1/4/2013
Utility maintenance personnel are exposed to hazardous voltages on a routine basis. To ensure safe work practices, personnel must understand safety regulations, electrical hazards and the use of safe work procedures and protective equipment. Applying safety regulations properly is essential to preventing accidents and loss of life.
-
Electrical Safety For Industrial Facilities
1/4/2013
Electrical safety within industrial facilities is paramount to keeping personnel safe around electrical equipment. To ensure a safe workplace, personnel must understand electrical safety regulations, electrical hazards, and the use of safe work procedures and protective equipment. The ability to interpret electrical safety standards and apply them is essential to an effective electrical safety program.