Di-225-D Industrial Data Collector: 2 Channel Analog Input

With a 2 channel high performance analog input board already embedded, the Di-225-D is perfectly placed to meet the requirements of various data acquisition applications.

Combined with an optional DSP co-processor, this platform offers the capability for real-time FFT analysis, acoustic measurement, or high speed analysis of any dynamic analog signal source. Other applications include measurement of strain, torque, pressure, temperature, etc. The platform offers both 1/8 VGA and 1/4 VGA (touchscreen) options.

• Replace Paperwork
  
• Electronic Forms/Asset Management
  
• Management Data
  
• Collection Data
  
• Reference Material

DI-225-D: Data Collector
The DI-225-D data collector allows easy condition monitoring of equipment found in process industries such as paper, petrochemical and primary metals. The DI-225-D collects field data, including vibration information and process variables, over a range of 10CPM (0.16 Hz) to 2,400,000CPM (40KHz). Bearing assessments are carried out using the industry proven ESP TM measurements. The DI-225-D utilises the latest advances in analog and digital electronics, including digital signal processing (DSP) and the industry's highest resolution Sigma-Delta A/D converter to provide both speed and accuracy in the data collection process.

Enclosure

Size: 186mm x 93mm (narrowest point) 186mm x 134mm (widest point)
Weight: < 700g (1.5lbs.)
Display: 1/8 VGA, Backlit Monochrome LCD, 57mm x 38mm viewable

Environmental

Sealing: IP65 (Dust & Water Proof) IP67 (Dust & Water Immersion proof)
Drop Test: 2 Meters (6.5 Feet) - To Mil 810 Specs
Temperature Ratings: -10 to + 60 °C Operating Temp -20 to + 70 °C Storage Temp

Analog Board

Input Signal Types: ICP TM Accelerometers, Velocity Transducers, Displacement Probes, Infrared Temp Sensors, Triaxial transducers, Accel / Vel Tranducers, AC/DC Volts, Manual Entry
Signal Inputs: 3x ICP, AC Signals, DC Signals, Tacho TEDS (Technical Electronic Data Sheet) Power input - battery charge Trigger input- photo optical/ etc
Measurement Parameters: Acceleration, Velocity, Displacement, ESPTM, Temperature, Phase, Voltage, User Specified
Measurement Types: Overall, Spectrum, Timewaveform, Phase, Order Normalised, Spectral Band Alarm
Machine Identification: Plant, Train, Machine and point ID, Point description, Units, Alarm Levels, Previous Measurements, Alarm Types
Input Channels: 2 Simultaneous
Channel 1: Triaxial ICP TM / AC / DC
Channel 2: ICP TM / AC / DC
Input signal range: +/- 40 Volts Max
Signal: RMS / Peak / Peak to Peak/True Peak
Transducer Check: Bias Voltage Integrity
Auto Range: Yes
Dynamic Range: > 90 dB
Frequency Range: Dc to 40 kHz max
AC / ICP: 0.16 Hz Min
Integrated: 0.22 Hz Min
Filters - High Pass: 2, 10, 70 Hz
Bearing Condition: ESP TM
ESP TM Filters: 0.6 - 1.25 / 1.25 - 2.5 / 2.5 - 5/ 5 - 10/ 10 - 20 kHz
Real Time Rate: 40kHz single channel
FFT Resolution: 100 - 12,800 lines (single channel)
Time Block Length: 256 - 16,384 samples (single channel)
Averaging: Time and Spectral
Alarms: Overall and Spectrum
Flash disk (data storage): 4 Mbytes Flash (8,16,32 Mb options)

System

PC Comms: RS232 (9 way D-Type) V.28 levels & IrDA
Communication: ActiveSync3
User Indicators: Red, Amber & Green user programmable LED's
Battery: Rechargeable Lion, Cannon BP914, 14 HoursGas Gauge - battery capacity indicator
Battery Recharge: Internally via mains adapter - Optional external charger available
Processor: Toshiba TX3912
Operating System: Windows CE (defined by application requirements)

Memory

Internal RAM: 16 Mbytes DRAM 16 Mbytes FLASH (16 Mbyte option)
Disk (applications & user data): 4 Mbytes FLASH (up to 32 Mbytes factory build option)
PC Card: PCMCIA Type II

Accessories: A number of accessories are available to complement the DI-225. These include: a plastic transit case, shoulder strap, utility belt, belt clips and a soft protective case.