Fortress Structural Gate

Fortress Structural Gate, manufactured by The Tymetal Corporation, is a cantilever system of unique double track design appropriate for openings up to 40 feet for singles and up to 80 feet for doubles.

The frame is fabricated from aluminum alloy extrusions with a top primary member rectangular in cross section and the bottom member a structural channel. Vertical members at the ends of the frame and between the counterbalance and opening are square in cross section with nominal base dimensions of no less than 2"x2".

The gate has separate semi-enclosed double tracks of extruded aluminum alloy. The gate frame is supported from the tracks by four, self aligning, 8-wheeled, sealed lubricant, ball-bearing truck assemblies. The bottoms of the support posts are equipped with two pairs of rubber guide wheels.

Diagonal cross bracing of 3/16" minimum diameter stainless steel aircraft cable is installed to brace the gate panels and provide adjustment.

The Tymetal Corp. , P.O. Box 139, Schuylerville, NY 12871. Tel: 518-692-9930; Fax: 518-692-9404.