Product/Service

PearlWeave Guardrail System

Source: Pearlweave Safety Netting Corp.
OSHA 1926.500-Subpart M requires guardrail and toeboard systems on all open-sided floors, platforms, runways, wall openings, holes, roofs, excavations, and machinery areas
Regulation

OSHA 1926.500-Subpart M requires guardrail and toeboard systems on all open-sided floors, platforms, runways, wall openings, holes, roofs, excavations, and machinery areas. Additionally, when equipment or materials are piled higher than the top edge of a standard toeboard, debris netting must be installed from the top rail to deck level to provide overhead protection for employees working below.

The PearlWeave Solution

PearlWeave Safety Netting's accepted guardrail/toeboard system is designed to provide protection in excess of these standards. When properly installed from required top-rail and secured directly to deck level, PearlWeave satisfies OSHA requirements for mid-rail and toeboard protection, as well as overhead protection as defined above.

Standard Uses:

  • Perimeter Protection
  • Hoistway
  • Landings
  • Scaffolding
  • Catwalks
  • Elevated Work Platforms
  • Conveyor Belts
  • Roofing
  • Machine Guarding
  • Demolition/Chutes
  • Stairways

Pearlweave Safety Netting Corp., 606 West 131 Street, New York, NY 10027. Tel: 212-283-0505; Fax: 212-862-8951.