Tablet Sorter

The tablet sorter Seidenader L 650 has been specifically designed to sort OBLONG-tablets by length. Oversized tablets, "twins" and broken or "halved" tablets are eliminated automatically.

Mode of operation:
The tablets are loaded into the feed hopper which has an adjustable feed gate. The tablets are fed over a perforated plate by a vibratory feeder. The perforated plate has three sections.

In section 1, the holes of the plate are small enough to separate only dust and small fragments. In section 2, tablets of correct width drop through the holes onto the sorting mechanism for sorting the tablets by length. Oversized tablets in width and "twins" pass on to section 3, where they are collected in a special container. In the sorting mechanism, the tablets slide into the holes of the rotating disk and are transported over sorting slots.Tablets which are too short will drop through the sorting slots into a container for rejects. Tablets of the exact length cannot fall through the slots and are discharged through a chute as good product.