Product/Service

Formaldehyde Passive Samplers

Source: SKC, Inc.
For PEL (0.2 to 2 ppm) and STEL (0.5 to 6 ppm) Sampling Designed to measure personal exposures to formaldehyde with accuracies of at least +/-25%,
For PEL (0.2 to 2 ppm) and STEL (0.5 to 6 ppm) Sampling
Designed to measure personal exposures to formaldehyde with accuracies of at least +/-25%, SKC Personal Formaldehyde Passive Samplers can be used for OSHA compliance monitoring. The PEL sampler collects formaldehyde at a low rate suitable for full-shift (8-hour) monitoring. The STEL sampler collects at a high rate for 15-minute sampling. Send samplers to an accredited laboratory for analysis.

Features and Benefits
• Inexpensive
• Small and unobtrusive
• Convenient and easy-to-use
• No other equipment or training needed
• No known interferences from other substances
• Validation based on NIOSH Method 3500
• Personal formaldehyde sampler for STEL measurements
• The only STEL sampler based on NIOSH 3500
• Detection limits and accuracies:
• PEL: 0.2 to 2 ppm (+/-25%)
• STEL: 0.5 to 6 ppm (+/-25%)
• Area: 0.01 ppm (+/-30%) to 0.02 ppm (+/-15%)

SKC, Inc., 863 Valley View Rd., Eighty Four, PA 15330. Tel: 724-941-9701; Fax: 724-941-2184.