The Model 911 Water Controller thermostatically mixes hot and cold water for emergency drench shower applications and eye wash units
Lawler ManufacturingG SRC="https://vertassets.blob.core.windows.net/image/adda90da/adda90da-7cc7-11d3-9a65-00a0c9c83afb/lawlermanufacturing-watercontroller.eh107.jpg">
The Model 911 Water Controller thermostatically mixes hot and cold water for emergency drench shower applications and eye wash units. The system features twin thermostatic elements designed to respond independently to incoming hot and cold water temperatures and provide protection against element failure. It is available in a range of finishes, piping configurations and cabinet designs, as well as in bronze, brass, copper, and stainless steel construction. A lockout plate and mounting bracket are available.
The system offers a positive hot water shut off that is enacted if the cold water supply to the valve fails. If both thermostatic elements fail, this unit will go into full cold flow to continue to meet shower and emergency fixture demands. It can temper water to a range of flows, allowing the valve to deliver safe, tempered water to a variety of emergency fixtures supplied by the same water line.
Specifications for this product include:
Maximum Inlet Pressure: 125 psi
Maximum Inlet Temperature: 180°F
Recommended Inlet Temperature: 140°F
Connections: 1 ¼-in. NPT
Capacity: 60 gpm at 30 psid
ANSI Standard Z358.1-1998 compliant
<%=company%>, 600 East Ohio Street, Indianapolis, IN 46202; phone: 317-261-1212; fax: 317-261-1208